Xerox Phaser 3610 User Manual page 117

Symptom
The output is blank.
Streaks appear in the output.
The output has a mottled
appearance.
Ghosting appears in the printed
output.
Solutions
• Turn off the printer, then turn it on again.
• If the error persists, contact your Xerox representative.
• Replace the Smart Kit Drum Cartridge.
• Contact your Xerox representative.
• Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
• Ensure that the humidity in the room is within specifications. For details,
see Relative Humidity
• Set the Adjust Transfer Unit setting to a higher value for the paper type.
For details, see Adjusting the Transfer Unit
• Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
• Change the Paper Type settings in the print driver.
In the Printing Preferences of the print driver, on the Paper/Output tab,
change the Paper Type setting.
• Replace the Smart Kit Drum Cartridge.
• Adjust the fuser. For details, see
• Enable Ghost Control. For details, see
Xerox
on page 129.
on page 91.
Adjusting the Fuser
Enabling Ghost Control
® ®
Phaser 3610 Black and White Printer
Troubleshooting
on page 92.
on page 98.
117
User Guide