Printer Does Not Print - Xerox Phaser 3610 User Manual

Printer Does Not Print

Probable Causes
The printer has an error.
The printer is out of paper.
A toner cartridge is empty.
The Error Indicator is blinking.
Both control panel indicators are off.
The printer is busy.
The printer cable is disconnected.
Solutions
To clear the error, follow the onscreen prompts. If the error persists,
contact your Xerox representative.
Load paper into the tray.
Replace the empty toner cartridge.
• To clear the error, follow the onscreen prompts.
• If the Ready Indicator is off, the printer has stopped working.
Turn off the printer, then turn it on again. If the error persists,
contact your Xerox representative.
Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer. If
the error persists, contact your Xerox representative.
• If the Ready Indicator is flashing, it is normal. A previous print
job could be the problem. Use the printer properties to delete all
print jobs in the print queue.
• Load the paper in the tray.
• If the Ready Indicator is not flashing after you send a print job,
check the Ethernet connection between the printer and the
computer.
• If the Ready Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer. Turn off the printer, then turn it on again.
• If the Ready Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer.
• If the Ready Indicator is not flashing after you send a print job,
check the Ethernet connection between the printer and the
computer.
®
Xerox Phaser
Troubleshooting
®
3610 Black and White Printer
User Guide
103