Troubleshooting - Olivetti Copia 9915F Facsimile Operation Manual

Digital copier
Hide thumbs Also See for Copia 9915F:
Table of Contents

Advertisement

Problem
Dialing cannot be done.
No transmission takes place.
Nothing is printed at the receiving end.
A distorted image is received at the other end.
The received document is faint.
Received images are distorted.
COPY SERVICE ERROR
FAX SERVICE ERROR (X)
Note: If your problem cannot be solved by carrying out the instructions in the Check
and Remedy column above, please contact your Olivetti dealer.
05 TROUBLE a(SUK) A5.P65

5. TROUBLESHOOTING

Troubleshooting
TROUBLESHOOTING
1
Check and Remedy
Make sure that the telephone line is
properly connected to both the unit and
the wall jack.
Make sure that the receiving machine has
not run out of printing paper.
Make sure that the receiving machine is
G3 compatible. (This information should
be
included
in
the
documentation.)
Check the display for possible error
messages.
Make sure that the document you are
sending is fed into the unit in the correct way.
Make sure that the receiving machine is
in working order.
Noise on the telephone line may cause
distortion. Try sending the document again.
Make a copy of the document on the unit.
If the copy is also distorted, the unit may
have a problem.
Ask the other party to send higher contrast
documents. If the contrast is still too low,
make a copy with the unit to check it.
Noise on the telephone line may cause
distortion. Have the sending party send
the document again.
The
drum
car tridge
replacement.
The copier will not function. Turn the power
switch off, remove the power cord from
the outlet, and contact your Olivetti dealer.
The fax will not function.Contact your
Olivetti dealer.
11/10/99, 16:10
machine's
may
need
5-1

Advertisement

Table of Contents
loading

Table of Contents