Advertisement
<Precautions for Connecting a Telephone to the Data Terminal>
• If a telephone is connected to the data terminal, check that the telephone complies
with FCC part 68.
• If a telephone which does not comply with FCC part 68 is used, the telephone con-
nection may be cut when data terminal transmission begins.
<Data terminal specifications>
Product name:
Transmission speed:
Telephone line:
Power requirements:
Current consumption: 600 mA
DC resistance:
4004-7715-01
DT-105 (Data Terminal)
2,400 bps (max)
General public telephone line; analog dual-line
DC5.2V (supplied via the AC adaptor)
149
CF2001P
<Modem Settings>
C4004P565CA
C4004P566CA
C4656P002CA
<Transmission Settings>
C4656P003CA
– 37 –
NEXT
NEXT
1. Plug in the AC plug for the data terminal, and
then turn it on.
2. Check that the External Panel Controller
appears in the computer screen, and then
display the Tech. Rep. Mode screen. (For
details about displaying the Tech. Rep. Mode
screen, refer to the Service Manual.)
3. Click [SMART].
4. Click [Modem].
5. Click [END].
1. Click [Common DT].
Advertisement
