Advertisement
9. Loading Paper
NOTE
For more details about loading paper, refer to the User Manual.
Tray 1
C4004U071AA
C4004U072AA
C4004U073AA
4004-7715-01
1. Prepare paper that meets this product's
specifications.
2. Pull out the paper drawer for Tray 1.
3. Press down on the paper-lifting plate until it
locks into place.
4. Slide the adjustable paper guides to fit the
size of paper to be loaded.
CF2001P
C4004U074AA
C4004U170AA
– 27 –
NEXT
NEXT
5. Load the paper into the drawer so that the
front side of the paper (the side facing up
when the package was unwrapped) faces
up.
NOTE
• Do not load so much paper that the top of
the stack is higher than the mark indicat-
ing the maximum paper capacity.
• Be careful not to touch the surface of the
paper take-up roller with your hands. If the
roller has been touched, wipe it with a dry
cloth.
6. Slide the adjustable paper guides against
the edges of the paper.
NOTE
Check that the adjustable paper guides are
pushed up against the edges of the paper.
7. Close the paper drawer.
8. Turn the media type selection dial on the
drawer to the setting for the type of paper
loaded.
9. From the control panel, select the size of the
paper loaded into Tray 1.
NOTE
For details on specifying settings, refer to
the User Manual.
Advertisement
