Advertisement
6. Installing the Manual Holder
C4004U553AA
C4004U554AA
C4004U098AA
4004-7715-01
1. Insert the tab on the bottom of the manual
holder into the slot in the printer as shown in
the illustration.
2. Insert the tabs on the left and right sides of
the manual holder into the corresponding
slots in the printer.
NOTE
If the optional finisher is used, attach the
manual holder to the back of the finisher at
the position shown, using the same proce-
dure described above.
CF2001P
7. Checking the Operation of the Printer
NOTE
Before adjusting the printer, be sure to install the interface kit and the control-
ler. For more details on their installation, refer to their manuals.
Loading Test Paper
Load test paper specifically for use with X-Rite calibration.
C4004U071AA
C4004U072AA
C4004U073AA
– 11 –
NEXT
NEXT
1. Prepare A4-size (or Letter-size) plain paper.
2. Pull out the paper drawer for Tray 1.
3. Press down on the paper-lifting plate until it
locks into place.
4. Slide the adjustable paper guides to the
A4(C) (or Letter(C)) paper size.
Advertisement
