Advertisement
C4657P001CA
C4659P002CA
C4004U596CA
4004-7715-01
5. Click [Dup. Left Margin].
6. Click [1st.].
7. Click the Start key in the External Panel
Controller.
A test page is printed.
CF2001P
a
C4657U014AA
– 34 –
NEXT
NEXT
8. Measure the width of loss for the test pattern
printed on the back of the test page.
NOTE
Do not measure from the back of the test
pattern.
Standard width (a):
3.0 mm ± 1.0 mm (with Fiery X3e installed)
5.0 mm ± 1.0 mm (with MicroPress PrintLink
2020m installed)
If the measured width of loss does not meet
its standard width, click
and
lower-right corner of the screen to adjust the
width. Print another test page and check the
printed image.
9. Adjust the paper reference positions for the
2nd, 3rd and 4th drawers in the same way
(by repeating steps 6 through 8).
NOTE
The 4th drawer is only available if two
optional paper feed units are installed.
in the
Advertisement
