Advertisement
Connecting the Equipment Cables
C4004U559AA
C4004U560AA
C4004U561AA
4004-7715-01
1. Insert a connector on the DTP32 cable (4)
into the I/O port on the side of the X-Rite,
and then insert the other connector of the
cable into port B on the selector.
2. Using the RS232 straight cable (5), connect
the COM 1 port of the computer to port C on
the selector.
NOTE
Make sure that the RS232 straight cable is
connected to the COM 1 port of the com-
puter.
3. Using RS232 straight cable (6), connect
DB25 of the converter to port A of the selec-
tor.
CF2001P
C4004U562AA
Brown
Red
Orange
C4004U563AA
– 14 –
4. Connect the IR port cable (8) to the printer.
5. Using a common screwdriver, tighten the
four screws shown in the illustration, and
then connect the harnesses of the IR port
cable to the terminals on the converter.
TXA terminal: brown harness
TXB terminal: red harness
RXA terminal: orange harness
RXB terminal: blue harness
NOTE
Be sure to connect the harnesses of the IR
port cable to the specified terminals.
Blue
NEXT
NEXT
Advertisement
