Advertisement
C4004U604AA
4004-7715-01
6. Loosen the screw of the terminal, and then
attach the ground wire as shown.
7. Attach the upper cover of the converter.
8. Plug the power cable of the converter into an
electrical outlet.
9. Plug the power cable of the X-Rite into an
electrical outlet.
CF2001P
X-Rite Caliblation
NOTE
• Start up the External Panel Controller on the Notebook PC before turning on
the printer.
• If an error message appears, follow the instructions described in the mes-
sage.
• Do not quit the External Panel Controller while it is being used. If it is quit-
ted, restart the printer and the External Panel Controller.
C4004U564AA
C4004U598AA
– 15 –
NEXT
NEXT
1. Start up the External Panel Controller on the
Notebook PC.
2. Set the power switch to "I".
3. Make sure that the selector knob is set to
"A".
Advertisement
