Advertisement
Specifying the Serial Number
NOTE
Be sure to specify the serial number.
When the serial number is specified, the settings for each unit can be read by the
printer. If the serial number is not specified, a correctly adjusted image cannot be
printed.
C4004P565CA
C4004P597CA
C4004P584CA
4004-7715-01
1. Check that the External Panel Controller
appears in the computer screen, and then
display the Tech. Rep. Mode screen.(For
details about displaying the Tech. Rep. Mode
screen, refer to the Service Manual.)
2. Click [System Input].
3. Click [Serial # Input].
CF2001P
C4004P585CA
– 21 –
NEXT
NEXT
4. Make sure that [Printer] is selected. Using
the keypad in the External Panel Controller,
enter the printer's serial number.
Repeat this step to enter the serial numbers
for [LCC], [Sorter/FN], and [Duplex].
5. Click [END].
6. Click [Menu], and then click [Fin. Time].
Advertisement
