Warnings - Canon PIXMA iP6600D Service Manual

2-4. Warnings

Warning
Low ink The following ink is low. Continue?
(Icon of each ink tank)
Yes
In Camera Direct Printing, only "Yes" can be
selected.
Print head temperature If the print head temperature does not fall, the
rise error code "5200" is displayed, indicating the
print head temperature rise error.
Protection of excess If the print head temperature does not fall, the
rise of the print head error code "5200" is displayed, indicating the
temperature
print head temperature rise error.
Restrictions on paper The current paper cannot be set. Change the
size and type.
Recommendation of Head alignment required. Load paper and press
the print head [OK].
alignment (only on
Yes
arrival of the printer)
Cancellation of image Reset the selected photo information?
select information
Yes
Cancellation of Reset trimming effect?
trimming information
Yes
Message on the LCD
No
No
No
No
- Select Yes, and press the OK button.
=> Printing starts, and it is indicated on the
LCD.
- Select No, and press the OK button.
=> Printing is cancelled, and the LCD
returns to the display immediately
before printing was attempted.
When the print head temperature falls, the
error is automatically cleared.
Note:
If the print head temperature exceeds the
specified limit when the access cover
(scanning unit) is opened, the carriage does not
move to the ink tank replacement position.
If the print head temperature exceeds the
specified limit, an intermission is inserted
during printing.
Re-select the supported paper type and size.
- Select Yes, and press the OK button.
=> Automatic print head alignment is done.
- Select No, and press the OK button.
=> The procedures on arrival of the printer
are finished.
When one or more images are selected in
Multi-photo print or Layout print, and if a user
tries to display the menu or sub-menu, the
message is displayed.
- Select Yes, and press the OK button.
=> The image selection is cancelled, and the
menu or sub-menu is displayed.
- Select No, and press the OK button.
=> The LCD returns to the display
immediately before the message was
displayed.
With an image trimmed, if CD / DVD print is
attempted, the message is displayed.
- Select Yes, and press the OK button.
=> The image trimming is cancelled, and
the procedures for CD / DVD print are
continued.
- Select No, and press the OK button.
=> The LCD returns to the display
immediately before the message was
displayed.
1-10
Solution