Other Error Messages - Canon PIXMA iP6600D Service Manual

alternate
blinking
Alarm RAM error
LED lit
*1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM
information print). If the waste ink amount is 7% or more, also replace the ink absorber kit (QY5-0147) when
replacing the logic board ass'y.
[See Section 3-3. Adjustment / Settings, (5) Service mode, for details.]

2-3. Other Error Messages

Message on the LCD
Cannot print via wireless
communication.
- No photo data
- Unsupported photo data
- Photo data too large
The selected paper cannot be fed
from cassette. Change the paper
source.
Cannot specify the followings
together. Change one of the
settings.
There are no photos in memory
card.
The value exceeds the number of
copies you can print.
Memory card is not set. Insert the
card after checking the direction.
DPOF information is not saved in
the memory card.
The number of copies to print is
not set. Input the number of copies.
This layout is available only for
A4 or 8.5"x11"(LTR).
Settings cannot be changed when
printing stickers.
Change the setting after removing
the card.
The card is currently write-
enabled. Set to read-only mode
before performing operation.
check at hard-power-on.
The RAM error occurred in the RAM check at
hard-power-on.
Cause
The received image data was invalid, or
the data size was too large, in infrared
communication from a mobile phone.
The paper type being used is not
supported for paper feeding from the
cassette. (Business Card, Credit Card
size paper and Photo Stickers are not
supported.)
Settings made conflict each other.
Supported image files are not in the
memory card.
During selecting images or specifying
the number of copies, the total print
quantity exceeds the prescribed value of
999.
No memory card is inserted in the slot.
DPOF print was selected in the menu,
but no DPOF files are contained in the
memory card.
Multi-photo print was attempted without
specifying the print quantity (with the
print quantity left "0" (zero)).
In Layout print, "Mixed 1, 2, or 3" which
is available only with A4 or LTR size
paper is selected, but the paper size is not
set to A4 or LTR.
With Sticker print selected, the Settings
button was pressed.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
With the memory card set to the
Read/Write mode, Card Direct printing
operation was attempted from the menu.
1-9
*1
2745)
- Logic board ass'y (QM2-
*1
2745)
Solution
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
Change the paper source to the ASF.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then disappears.
After the error message is displayed for a
while, the last operation before the error
is cancelled, and the total print quantity
returns to the value before the error.
Set a memory card.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then disappears. Specify the print
quantity.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.