Maintenance; Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon PIXMA iP6600D Service Manual

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM At logic board ass'y replacement To initialize settings other than
initialization
(EEPROM
settings)
Destination At logic board ass'y replacement To set the destination.
settings
(EEPROM
settings)
LCD language At logic board ass'y replacement To set the language to be
settings
Waste ink - At logic board replacement
counter - At waste ink absorber
resetting
replacement
(EEPROM
settings)
CD / DVD - At logic board replacement
detection sensor
- At carriage unit replacement
light volume
*1
correction
Ink system - At logic board replacement
function check
- At platen unit replacement
- At carriage unit replacement
Paper feed At paper feed motor
motor position replacement
*2
adjustment
Grease - At carriage unit replacement
application
- At PR shaft ass'y replacement
- At CL base or CL gear
replacement
Note: DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as they are
not re-adjustable.
*1: Only for CD / DVD printing supported regions.
*2: The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this printer that require periodic replacement by a service engineer.
(4) Replacement consumables
Timing
the following:
- USB serial number
- Destination setting
- Waste ink counter
- CD / DVD correction value
displayed on the LCD.
To reset the waste ink counter.
To correct the light volume for
the CD / DVD detection sensor.
To maintain detection
functionality for presence of the
ink tanks and each ink tank
position.
To adjust the belt tension.
(Position the paper feed motor so
that the belt is stretched tight.)
- To maintain sliding properties
of the carriage shaft and the lift
cam shaft.
- To protect the printer's sliding
portions (gears).
Purpose
1-1
Approx.
Tool
time
None. 1 min.
None. 1 min.
Perform in the
service mode.
None. 1 min.
None. 1 min.
Perform in the
service mode.
None. 2 min.
(Automatically
performed in the
service test print)
1 min.
None.
Perform in the
service mode.
None. 5 min.
- FLOIL KG- 1 min.
107A (QY9-
0057)