Canon PIXMA iP6600D Service Manual
Hide thumbs Also See for PIXMA iP6600D:

Advertisement

PIXMA iP6600D
SERVICE
MANUAL
Canon
Copyright 2005, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which
shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.

Advertisement

Table of Contents
loading

Summary of Contents for Canon PIXMA iP6600D

  • Page 1: Service Manual

    PIXMA iP6600D SERVICE MANUAL Canon Copyright 2005, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.
  • Page 2 When changes are made to the contents of the manual, Canon will release technical information when necessary. When substantial changes are made to the contents of the manual, Canon will issue a revised edition. The following do not apply if they do not conform to the laws and regulations of the region where the manual or product...
  • Page 3 I. MANUAL OUTLINE This manual consists of the following three parts to provide information necessary to service the PIXMA iP6600D: Part 1: Maintenance Information on maintenance and troubleshooting of the PIXMA iP6600D Part 2: Technical Reference New technology and technical information such as FAQ's (Frequently Asked Questions) of the PIXMA iP6600D...
  • Page 4: Table Of Contents

    II. TABLE OF CONTENTS Part 1: MAINTENANCE 1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer 1-2. Customer Maintenance 1-3. Product Life 1-4. Special Tools 1-5. Serial Number Location 2. LIST OF ERROR DISPLAY / INDICATION 2-1.
  • Page 5 1. BLOCK DIAGRAM 2. CONNECTOR LOCATION AND PIN LAYOUT 2-1. Logic Board Ass'y 2-2. Print Beam Board 2-3. Card Slot Board (Card Slot Unit) 2-4. Operation Panel Board 2-5. Carriage Board (Print Head Connector) 3. PIXMA iP6600D SPECIFICATIONS 4. PRINT MEDIA SPECIFICATIONS...
  • Page 6: Part 1 Maintenance

    Part 1 MAINTENANCE...
  • Page 7: Maintenance

    1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer (1) Adjustment Approx. Adjustment Timing Purpose Tool time EEPROM At logic board ass'y replacement To initialize settings other than None. 1 min. initialization the following: (EEPROM - USB serial number settings)
  • Page 8: Customer Maintenance

    There are no consumables that require replacement by a service engineer. 1-2. Customer Maintenance Approx. Adjustment Timing Purpose Tool time Print head At print head replacement. To ensure accurate dot - Printer buttons 3 min. alignment placement. (automatic / manual) - Computer (automatic settings via the printer...
  • Page 9: Special Tools

        Black text: When printing the Canon standard pattern (1,500 characters per page) on A4 size plain paper, with the default settings in the Windows XP driver, using Word 2003. Color chart: When printing the ISO/JIS-SCID N5 pattern on A4 size plain paper in bordered printing, with the default settings in the Windows XP driver, using Photoshop 7.0.
  • Page 10: Serial Number Location

    1-5. Serial Number Location On the carriage flexible cable holder (visible on the left of the carriage after the printer is turned on, and the panel cover is opened). To the table of contents To the top <Part 1: 1. MAINTENANCE>...
  • Page 11: List Of Error Display / Indication

    2. LIST OF ERROR DISPLAY / INDICATION Errors and warnings are displayed by the following ways: 1) Operator call errors are indicated by the Alarm LED lit, and the error and its solution are displayed on the LCD in text and by icon. 2) Warnings are displayed on the printer driver Status Monitor.
  • Page 12 the Stop/Reset button.   [1841] inner cover and press [OK]. Inner cover open during Close the inner cover, and press   printing on paper. the Stop/Reset button. [1846] Inner cover open during Close the inner cover, and press   printing on paper (print the Stop/Reset button.
  • Page 13: Service Call Errors

    The remaining ink (Applicable ink tank icon) An ink tank which has once been Printing with a once- amount unknown. empty is installed. Replace the empty or refilled ink The remaining level of the applicable ink tank with a new tank can damage the [1683] following ink cannot be correctly...
  • Page 14 - Logic board ass'y (QM2- 2745) - Paper feed motor (QK1- 1502) 4 times Purge cam sensor error An error occurred in the purge unit. - Purge unit (QM2-2299) [5C00] - Logic board ass'y (QM2- 2745) 5 times ASF (cam) sensor error This error takes place when feeding paper - Sheet feed unit (QM2- [5700]...
  • Page 15: Other Error Messages

    alternate check at hard-power-on. 2745) blinking Alarm RAM error The RAM error occurred in the RAM check at - Logic board ass'y (QM2- LED lit hard-power-on. 2745) *1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM information print).
  • Page 16: Warnings

    2-4. Warnings Warning Message on the LCD Solution Low ink The following ink is low. Continue? - Select Yes, and press the OK button. (Icon of each ink tank) => Printing starts, and it is indicated on the LCD. - Select No, and press the OK button. =>...
  • Page 17: Troubleshooting By Symptom

    2-5. Troubleshooting by Symptom Symptom Solution Faulty operation The power does not turn on. - Confirm the connection of The power turns off immediately - the power cord, and after power-on. - between the logic board and the power supply unit.
  • Page 18 if any. - Replace the purge unit. Printing is faint, or white lines - Remove and re-install the print head. appear on printouts even after print - Replace the head cleaning. - ink tank, Line(s) not included in the print - print head data appears on printouts.
  • Page 19: Repair

    3. REPAIR 3-1. Notes on Service Part Replacement (and Disassembling / Reassembling) Service part Notes on replacement Adjustment / settings Operation check Logic board ass'y - Before removal of the logic After replacement: - EEPROM information board ass'y, remove the print QM2-2745 1.
  • Page 20 QM2-2313 1. Check the ink system function. [See 3.3. Adjustment /   Settings, (5) Service mode.] PR lift shaft ass'y At replacement: - Service test print QL2-0936 1. Apply grease to the sliding portions. [See 3.3. Adjustment / Settings, (2) Grease application.] Timing slit strip film - Upon contact with the film,...
  • Page 21: Special Notes On Repair Servicing

    3-2. Special Notes on Repair Servicing (1) External cover removal (I) Open the access cover, and release the hooks on the left and right side of the printer (indicated by the blue circles) to remove the side covers. (II) Remove the screws (at 2 locations) and the flexible cable (at 1 location).
  • Page 22: Print Mode

      3-3. Resolution in Duplex Printing   3-4. Resolution in Camera Direct Printing   3-5. Resolution in Card Direct Printing   To the table of contents To the top <Part 2: 3. PRINT MODE>...
  • Page 23: Faq (Problems Specific To The Ip6600D And Corrective Actions)

    4. FAQ (Problems Specific to the iP6600D and Corrective Actions) Possible call or No. * Function Phenomenon Condition Cause Corrective action complaint Skewed paper - Paper feeding from Due to its Change the paper - Paper feeds at feeding the cassette, Photo mechanism, feeding method an angle.
  • Page 24 as A4) is printed. paper is absorbed 2. If soiling on the by the platen's ink - With Photo Paper paper still absorber. Absorbed Plus Double Sided remains after 3 ink may attach to or postcards, the times of the platen rib(s) phenomenon is Bottom plate after several dozen...
  • Page 25 the auto sheet feeder, manually print each side of paper. - PP-101D, PP-101, When multiple Set only a single PR-101, SG-101, sheets of paper are sheet of paper in etc. set, the back side of the auto sheet Print paper being picked feeder.
  • Page 26                        *3: How to prepare and set the ASF sub-roller cleaning sheet: 1) Fold a sheet of plain paper lengthwise in half.     2) Fold the paper at approx. 60 mm from the end, and fold the folded end in half backward, as shown below.  ...
  • Page 27   3) Moisten the folded end portion (indicated by the blue circle in the figure below) using a wipe, and set the paper in the ASF so that the moistened edge of the paper contacts the 2 sub-rollers. Then, fold the other end of the paper along the ASF cover edge to hook the paper to the ASF cover, as shown below.
  • Page 28   To the table of contents To the top <Part 2: 4. FAQ> 2-12...
  • Page 29: Part 3 Appendix

    Part APPENDIX...
  • Page 30: Pixma Ip6600D Specifications

    3. PIXMA iP6600D SPECIFICATIONS <Printer> Type Desktop serial color bubble jet printer Paper feeding method Auto sheet feed (ASF, cassette, automatic duplex printing, CD / DVD printing Resolution 9,600 x 2,400dpi (Max.) 4 x 6, borderless printing: Approx. 46 sec. (standard mode, PP-101, Full Page SCID No. 2)
  • Page 31: Direct Printing

    Available (automatic or manual alignment via printer driver Maintenance, or via the Print head alignment operation panel button in Camera Direct Printing, automatic alignment at default) *1: Only for CD / DVD printing supported regions <Direct printing> Compact Flash TYPE I/II (3.3V), Microdrive, SmartMedia Card (3.3V only), Memory Stick, Memory Stick PRO, SD Card, MultiMedia Card, xD- Supported memory Memory card drive...
  • Page 32 - A photo from a 5 mega-pixel digital camera - 4 x 6 borderless Throughput - Exif print - Standard print quality - Process from pressing the printing start button to ejecting paper Supported digital Digital cameras and digital video cameras supporting Bubble Jet Direct or camera PictBridge Supported print...
  • Page 33 Note: The ink tanks for the Japanese models are not compatible with those for the non-Japanese models. Be sure to use the appropriate ink tanks in servicing. To the table of contents To the top <Part 3: 3. PIXMA iP6600D Specifications> 3-19...
  • Page 34: Print Media Specifications

    4. PRINT MEDIA SPECIFICATIONS <Plain paper / specialty paper> The following types of paper are recommended: Paper ASF stacking Camera Card Print feeding Type Name Size capacity Direct Direct Beam method (max.) Printing Printing Printing (auto) Plain paper 64 to 105 A4, B5, LTR, ASF, 13 mm...
  • Page 35 T-shirt transfer TR-301 ASF, 1 sheet Cassette Envelope COM #10 241 x 105 mm ASF / 10 / 5 Cassette envelopes DL-size 220 x 110 mm ASF / 10 / 5 Cassette envelopes *1: ASF only for LGL *2: When A4 or LTR is selected for Paper Size, plain paper is selectable for Paper Type. With plain paper selected for Paper Type, printing is done with borders even when borderless printing is selected.

Table of Contents