Functional Description; Use Of Extension Cords - Black & Decker LINEFINDER JS680V Instruction Manual

functional Description

1. On/Off switch
2. Lock-on button
3. Saw blade locking lever
4. Saw blade
5. Saw blade support roller
6. Shoe plate
7. Bevel angle window
8. Shoe plate beveling lever
9. Dust extraction port
10. "Smart Select
TM
11. Saw blade storage
compart.
12. UV light On/Off button
13. UV light
14. Highlighter marking pen
15. Pen storage

USE Of ExTENSION CORDS

Make sure the extension cord is in good condition before using. Always use the proper
size extension cords with the tool – that is, proper wire size for various lengths of cord and
heavy enough to carry the current the tool will draw. Use of an undersized cord will cause
a drop in line voltage resulting in loss of power and overheating. For proper size cords
see chart below.
Volts
120V
240V
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More
Than
0
6
10 -
12 -
MOTOR
Be sure your power supply agrees with nameplate marking. 120 Volts AC only means
your tool will operate on standard 60 Hz household power. Do not operate AC tools on
DC. A rating of 120 volts AC/DC means that you tool will operate on standard 60 Hz AC
or DC power. This information is printed on the nameplate. Lower voltage will cause loss
of power and can result in over-heating. All Black & Decker tools are factory-tested; if this
tool does not operate, check the power supply.
12
" dial
13
3
Minimum Gage for Cord Sets
0-25
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
0-50
Not more
Than
- 6 18
- 10 18
12 16
16 14
SAVE ThESE INSTRUCTIONS
2
1
10
5
4
6
Total Length of Cord in feet
26-50 51-100
51-100 101-200
American Wire Gage
16 16
16 14
16 14
12 Not Recommended
5
11
8
7
9
101-150
201-300
14
12
12
14
15