Intended Use
Detail Sanding
Sanding in extremely tight areas otherwise difficult to reach and require hand sanding.
Select a high oscillating frequency. Sand with continuous motion and light pressure.
Applying excessive pressure does not increase material removal; but will prematurely
wear sanding sheets.
flush Cutting
Remove excess wood from door jamb, window sill and/or toe kick. Removing excess
copper or PVC pipe.
Removal Work
Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.
Removal of excess Materials
Tile grout, plaster, mortar splatters, concrete on tiles, sills.
Preparation of Surfaces
New floors and tiles.
functional Description
A) On/Off switch
B) Variable speed dial
C) Power cord
D) Clamp washer
BD200TMT
A
BD200MT
A
SAve TheSe INSTRUCTIONS
G
E) Bolt
F) Hex wrench
G) Tool-Free Release
B
C
B
C
6
Included with BD200TMT
E
D
F