REMOVAL OF CASING
1. Remove the four screws (1, fig. 2), securing the operating switches assembly to facia
panel.
2. Lower the switch assembly to the inside of the machine.
3. Open the hinged door and withdraw the waste bin (1, fig.3).
4. Remove the four nuts and washers (1, fig.4) securing the casing to the frame assembly.
These are situated within the main frame, upper section.
5. Remove the casing from the main frame assembly (2, fig.4).
6. Assemble in reverse sequence.
DEM
PAPER SHREDDER S16
PAPER SHREDDER S16
SERVICE INSTRUCTIONS
SERVICE INSTRUCTIONS
Page 20 of 43
SECTION 4
SECTION 4
FEBRUARY 07