K2 Mounts K2 Series Manual page 8

Anchor Mounting Plate to Wall
1. Hold the Mounting Plate against the wall,
then align the marked Mounting Plate slots
with the Concrete Anchors in the wall. Using
the ratchet and 7/16" socket, attach the
Mounting Plate into the anchors with the
six 1/4" x 2-1/2" Lag Bolts and six Mounting
Plate Washers.
2. Verify that you have securely fastened the
Mounting Plate to the wall.
Warning You must use and securely fasten all six Lag Bolts in each Mounting Plate for
!
proper installation. Failure to do so could result in property damage or personal injury.
8 www.k2mounts.com