Installation; Determine The Wall Mounting Location - K2 Mounts K2 Series Manual

Installation

Installing your Screen Wall Mount bracket involves the following steps:

1. Determine the Wall Mounting Location

2. Attach the Mounting Plate to the Wall
3. Attach the Mounting Brackets to the screen
4. Hang the screen on the Mounting Plate
5. Adjust the Screen Angle (K2-T-S and K3-T-S only)
6. Position the Cables
Determine the Wall Mounting Location
1. Decide where you want to hang your screen. A good location is near an electrical outlet,
and within cable reach of any components you plan to connect to the screen.
Warning:
!
Use common sense when determining the wall mounting location. For example, do
not hang your screen over a bed, crib, or child's play area.
2. Draw a mark on the wall where you want the center of the mounted screen to be located.
This will be refered to as the "Mounted screen Center Point" throughout this manual.
3. If you are mounting to a wood stud wall, continue onto the next page. If you are mounting
to a concrete or concrete block wall, go to page 7.
4 www.k2mounts.com