Decoder; Ssl Encryption; Auto-Connect; Audio - Bosch FW5 Software Manual

68 en | Alarm
12.1.8

Decoder

If a split image is set for the selected video output, select a
decoder to display the alarm image. The decoder selected
determines the position of the image.
12.1.9

SSL encryption

SSL encryption protects data used for establishing a
connection, such as the password. By selecting On, only
encrypted ports are available for the Remote port parameter.
SSL encryption must be activated and configured on both sides
of a connection. The appropriate certificates must also have
been uploaded. Configure and activate encryption for media
data (video, metadata) on the Encryption page.
12.1.10

Auto-connect

Select On to automatically re-established a connection to one
of the previously specified IP addresses after each reboot,
connection breakdown, or network failure.
12.1.11

Audio

Select On to transmit the audio stream with an alarm
connection.
AM18-Q0605 | v5.0 | 2011.07 Software manual
Camera Browser Interface
Bosch Security Systems