Table of Contents
Advertisement
32
en | Advanced General Settings
7.2
Password
A password prevents unauthorized access to the device. The
device has three authorization levels: service, user, and live.
–
–
–
You can define and change a password for each authorization
level if you are logged in as service or if the camera is not
password protected.
Use the various authorization levels to limit access. Proper
password protection is only guaranteed if all higher
authorization levels are also protected with a password. For
example, if a live password is assigned, a service and a user
password should also be set. When assigning passwords,
always start from the highest authorization level, service, and
use different passwords.
7.2.1
Password
Define and change a separate password for each level. Enter
the password (19 characters maximum) for the selected level.
7.2.2
Confirm password
Re-enter the new password to ensure that there are no typing
mistakes.
The new password is only saved after clicking Set. Therefore,
click Set immediately after entering and confirming the
password, even if assigning a password at another level.
AM18-Q0605 | v5.0 | 2011.07
service is the highest authorization level. Entering the
correct password gives access to all the functions of the
camera and allows all configuration settings to be
changed.
user is the middle authorization level. This user can
operate the device, play back recordings, and also control
a camera but cannot change the configuration.
live is the lowest authorization level. It can only be used to
view the live video image and switch between the different
live image displays.
Software manual
Camera Browser Interface
Bosch Security Systems
Advertisement
Table of Contents
