Table of Contents
Advertisement
LOCATION 174
DEVICE STATUS FLAGS (2 segments)
This location contains specific status information of the GSM/GPRS module. If the option is
"On", the status condition is true.
Segment 1
Segment 2
LOCATION 175
GSM MODEM MANUFACTURER (READ ONLY) (16 segments)
This location displays the manufacturer of the GSM/GPRS modem used on the NX-7002.
LOCATION 176
GSM MODEM MODEL (READ ONLY) (16 segments)
This location displays the model of GSM/GPRS modem used on the NX-7002.
LOCATION 177
GSM MODEM SOFTWARE REVISION (READ ONLY) (16 segments)
This location displays the software revision of the GSM/GPRS modem used on the NX-7002.
LOCATION 178
GSM MODEM SERIAL NUMBER (READ ONLY) (16 segments)
This location displays the serial number of the GSM/GPRS modem used on the NX-7002.
LOCATION 179 –
LOCATION 215
RESERVED
NX-7002 Installation manual
1 =
On: Communication with GSM modem OK
2 =
On: SIM card PIN is OK
3 =
On: Logged in to the GSM network
4 =
On: Sending SMS
5 =
On: Using GSM audio connection
6 =
On: Using GSM CSD connection
7 =
On: Connected to GPRS network
8 =
On: SIM card PUK code required
1 =
On: Battery voltage failure
The NX-7002 measures and monitors battery voltage. It shares a
battery with the control panel.
2 =
On: GSM PSU voltage failure
The main battery creates a 3.8 V power supply for the GPRS modem.
3 =
On: Bus voltage failure
The bus supplies a 13.8 V voltage to the NX-7002.
4 =
On : Communication channel failure
5 =
On : Up/download session in progress
6 =
On : Up/download session starting
7 =
On : Reporting in Progress
8 =
On : RSSI level at acceptable level
Page 23
09/02/05
- Quick Links:
- Programming the Nx-7002 Via the Led...
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NetworX NX-7002 and is the answer not in the manual?