Enrolling The Sim Card On The Gsm Network; Enrolling The Sim Card On The Gprs Network - GE NetworX NX-7002 Installation Manual

Enrolling the SIM card on the GSM network

•
•
•
•
•
•
•
Note: Each time you exit programming mode, the modem restarts and reads the PIN
number, network operator and SMSC address number from the NX-7002 configuration.

Enrolling the SIM card on the GPRS network

•
•
•
•
•
•
•
NX-7002 Installation manual
Insert the SIM card. See Inserting the SIM card for more information.
Power up the NX-7002 GPRS module.
Enter programming mode. See Programming he NX-7002 GPRS module for more
information.
Press 78# to select the module.
Press 169# to enter the GSM SIM PIN code location.
Enter the first digit of the SIM PIN code. Press * to move to the next segment. Continue in
this way until all digits are programmed. Press # to save the changes and exit the
location.
Exit programming mode. The SIM is automatically enrolled on the GMS network.
Enter programming mode.
Press 78# to select the module.
Press 169# to enter the GSM SIM PIN code location.
Enter the first digit of the SIM PIN code. Press * to move to the next segment. Continue in
this way until all digits are programmed. Press # to save the changes and exit the
location.
Obtain an Access Point Number from the supplier. Press 60# to enter the Name of GPRS
access point – APN location. Enter the first digit of the APN. Press * to move to the next
segment. Continue in this way until all digits are programmed. Press # to save the
changes and exit the location.
(Optional) You may need to enter the PPP password and PPP User ID required by the
network. To do this, press 32# to select the PPP (dial-up account) user ID location and
program the password. Then press 34# to select the PPP (dial-up account) password
location and program the user ID.
Exit programming mode. The SIM PIN is automatically enrolled on the GSM network.
Page 11 09/02/05