ATEN KN9108 User Manual page 56

KN9108 / KN9116 User Manual
Character
C Grants the user administrator privileges, allowing the user to
configure the system.
W Allows the user to access the system via the WinClient ActiveX
Viewer program.
J Allows the user to access the system via the Java Client program.
P Allows the user to access an attached Power Over the Net™ device.
L Allows the user to access log information via the user's browser.
PN Restricts the user from accessing the OSD port list.
Syntax: pn/1/2/3/4
PV Limits the user's access to viewing of the OSD port list only.
Syntax: pv/1/2/3/4
UHK Defines the OSD Hotkey (see OSD Hotkey, page 95). (uhk0: Scroll
Lock + Scroll Lock; uhk1: Ctrl + Ctrl)
Syntax: uhk0
UOL Defines the OSD List Function (see page 28).
(uol0: All; uol1: Powered On; uol2: Quick View; uol3: Quick View +
Powered On)
Syntax: uol0
UODM Selects how the Port ID displays (see ID Display, page 95).
(uodm0: Port Number + Port Name; uodm1: Port Number; uodm2:
Port Name)
Syntax: uodm0
UODT Determines the length of time in seconds that the Port ID displays on
the monitor after a port change (see ID Duration, page 95).
Syntax: uodtn (where n represents a number from 0-255)
UBUZ Turns the beeper on or off (see Beeper, page 95).
(ubuz0: Beeper Off; ubuz1: Beeper On)
Syntax: ubuz0
ULT When there is no input from the user for the amount of time set with
this function, the user is automatically logged out. The user will need
to log in again. Set the Logout Timeout from 0-180 minutes.
Syntax: ultn (where n represents a number from 0-180)
USM Selects which computers are accessed under Auto Scan Mode (see
Scan Select, page 95).
(usm0: All; usm1: Powered On; usm2: Quick View; usm3: Quick View
+ Powered On)
Syntax: usm0
UST Determines the length of time in seconds the KVM focus dwells on
each port in Auto Scan Mode (see Scan Duration, page 95).
Syntax: ustn (where n represents a number from 0-255)
44
Meaning