ATEN KN9108 User Manual page 38

KN9108 / KN9116 User Manual
Transparent: clicking this button (or pressing F7) causes the OSD display
to become semi-transparent, allowing whatever the OSD screen is
covering to show through. Clicking the button again causes the OSD
display to revert back to normal opacity.
Note: 1. The Screen View and Transparent buttons are on the Local
Console OSD only. The Web browser OSD and AP versions do
not have these functions.
2. It is recommend that you set the refresh rate of the monitor higher
than 75Hz before using this feature.
3. When the transparent feature is enabled, if you switch to a null
port the feature will be disabled.
Log out: clicking this button (or pressing F8) closes the OSD display and
logs you out of the session.
Close: clicking this button (or pressing Esc) closes the OSD display but
does not log you out of the session. You can bring the display back with
the OSD hotkeys (see OSD Hotkey, page 95).
The OSD consists of four pages, each with a specific set of functions: Main,
Configuration, Administration, and Log.
26