ATEN KN9108 User Manual page 115

A description of the items is given in the table below:
Item
New search
Search last results
Search excluding last
results
Server List
Priority List
Start Date
Start Time
End Date
End Time
Pattern
Results
Search
Print
Export
Exit
This is one of three radio buttons that define the scope of the
search. If it is selected, the search is performed on all the
events in the database for the selected KN9108 / KN9116.
This is a secondary search performed on the events that
resulted from the last search.
This is a secondary search performed on all the events in the
database for the selected KN9108 / KN9116 excluding the
events that resulted from the last search.
KN9108 / KN9116 units are listed according to their IP
address. Select the unit that you want to perform the search
on from this list. You can select more than one unit for the
search. If no units are selected, the search is performed on all
of them.
Sets the level for how detailed the search results display
should be. 1 is the most general; 3 is the most specific.
Select the date that you want the search to start from. The
format follows the YY/MM/DD convention, as follows:
2005/11/04
Select the time that you want the search to start from.
Select the date that you want the search to end at.
Select the time that you want the search to end at.
Key in the pattern that you are searching for here. The
multiple character wildcard (%) is supported. E.g., h%ds
would match hands and hoods.
Lists the events that contained matches for the search.
Click this button to start the search.
Click this button to print the search results.
Click this button to export the search results.
Click this button to exit the Search dialog box.
Chapter 8. The Log Server
Explanation
103