Front Panel Installation - Daewoo DTA-240LH Installation And Owner's Manual

FRONT PANEL INSTALLATION

1. Detach the inlet grille from the front panel.
3. After fastening two screws, rotate the front panel to
be fixed on the edge of the key hole and fasten the
other two screws to be fixed completely.
5. Fasten the control box cover as the front panel
installed.
2. Fasten two fixing screws for front panel diagonally to
the indoor unit by one third of each.
• Piping side mark of front panel must be fit together
with that of main body.
4. Connect the cable of front panel to the PCB as the
figure shows.
6. Close the front grille and fasten the fixing studs.
Control
bow cover
13