Daewoo DWC-084R Use & Care Manual page 13

FUNCTION
FAN MODE
MODE
or
MODE
Push the 'MODE' button until
'FAN' lamp lights.
ON/OFF ENERGY SAVE
ENERGY
SAVE
ENERGY
or
SAVE
Push the 'ENERGY SAVE'
button.
TURBO MODE
MODE
or
MODE
Push the 'MODE' button until
'TURBO' lamp lights.
OFF TIMER
TIMER/
CANCEL
Push the 'TIMER/CANCEL'
button when unit is working.
(REMOCON ONLY)
OPERATION
1. The Fan works only.
2. In this mode, the unit circulate room air.
3. Fan speed can be changed.
1. Desired temperature is changed as
follows by pushing 'ENERGY SAVE'
button.
+1 C
+1 C
1hr
'ENERGY SAVE' 'ENERGY SAVE'
ON
2. When the 'ENERGY SAVE' button is
pushed, the fan speed goes to 'Low'
3. When the 'ENERGY SAVE' function
is canceled by pushing 'ENERGY
SAVE' button once again, the
desired temperature is return to the
former desired temperature.
1. Fan speed is set to 'HIGH' and
desired temperature to 18°C (64°F).
1. Timer is set to as follows by pushing
"TIMER/CANCEL" button.
(1hr 2hr 3hr 4hr 5hr 6hr 8hr
10hr 12hr 16hr 20hr 24hr cancel)
2. Unit is off after timer is over.
3. If you want to cancel timer, push this
button again at any time.
1. Current room temperature is displayed.
2. 'FAN' lamp lights.
3. 'ROOM TEMP' lamp lights.
1. Current room temperature is displayed.
2. 'ENERGY SAVE' lamp lights.
3. 'ROOM TEMP' lamp lights.
-2 C
hr
OFF
1. Current room temperature is displayed.
2. 'TURBO' lamp lights.
3. 'ROOM TEMP' lamp lights.
1. 'TIMER' lamp lights.
2. Set time is displayed.
3. After a few seconds, display is
changed to current room temprature.
and 'ROOM TEMP' lamp lights.
13
DISPLAY
FAN
TURBO
COOLING
TIMER
ENERGY
ROOM TEMP DESIRED TEMP
SAVE
FAN
TURBO
COOLING
TIMER
ENERGY
ROOM TEMP DESIRED TEMP
SAVE
FAN
TURBO
COOLING
TIMER
ENERGY
ROOM TEMP DESIRED TEMP
SAVE
FAN
TURBO
COOLING
TIMER
ENERGY
ROOM TEMP DESIRED TEMP
SAVE
FAN
TURBO
COOLING
TIMER
ENERGY
ROOM TEMP DESIRED TEMP
SAVE