Section 7.3 Replacement Of Insulation; Section 7.4 Replacement Of Base Moulding; Section 8.0 Replacement Of Pcb - Rexel T300 Service And Parts Manual

SECTION 7.3
Replacement of insulation
6. Carry out procedures 1 to 4 section 7.1
7. Insulation is secured using double sided sticky tape.
8. Ease free sticky tape from insulation.
9. Remove and replace insulation.
10. Reassemble machine in reverse sequence of operations 1 to 3.
SECTION 7.4
Replacement of Base Moulding
7. Carry out procedures 1 to 5 section 7.1
8. The extrusion/heater assembly will now become free.
9. Place on one side.
10. Remove insulation as procedures 2 to 4 section 7.3
11. Replace base moulding.
12. Reassemble machine in reverse sequence of operations 1 to 4.
SECTION 8.0
Replacement of PCB
4. Carry out procedures 1 to 7 section 6.
5. Replace the PCB
6. Reassemble machine In reverse sequence.
T300.doc
Issue No 1
ILLUSTRATED PARTS MANUALS
T300 THERMAL BINDER
220-240V
17