Leaving A Memo; Memory Full; Remote Access; Erase Messages - GE 23598 User Manual

Erase Messages

Single Messages
You can erase a message itself, leaving the Caller ID information.
• While the message is playing, press and release the DELETE button. The unit erases
the current message and announces, "Message erased."
All Messages
You can also erase all the old messages only, leaving the new messages and Caller ID
information.
While the unit is in ready-to-answer mode, press and hold the DELETE button until
the unit announces, "Messages erased."
• New messages can not be erased in this way. To erase new messages, play them
then press the DELETE button during play back.

Leaving a Memo

Use the MEMO button to record a specific message for others who have access to
the unit.
1. Press and hold the MEMO button. The unit announces: "Record your memo after
the tone."
2. Record your message after the beep.
3. Release the MEMO button when you're finished talking. The unit treats the memo
as a message, as the display shows.

Memory Full

When the unit's memory is full, it answers after 10 rings and announces: "Memory
is full. No messages will be recorded." A 20-second waiting period follows, allowing
you to enter your security code.

Remote Access

You can access your answerer from any touch-tone phone from another location
by entering your 3-digit security code (the default security code is 1 2 3, but you can
change it.) Be aware that remote functions do not work with rotary or push-button
pulse-dialing phones.
22