Erase Messages; Memory Full; Leaving A Memo - GE 24178 User Manual

Erase Messages

Single Messages
You can erase a message itself, leaving the Caller ID information.
• While the message is playing, press and release DELETE. The unit erases the
current message and announces, "Message erased."
All Messages
You can also erase all the old messages only, leaving the new messages and Caller ID
information.
While the unit is in ready-to-answer mode, press and hold DELETE until the unit
announces, "Messages erased."
• New messages can not be erased in this way. To erase new messages, play them
then press DELETE during play back.

Leaving a Memo

Use the MEMO button to record a specific message for others who have access to
the unit.
1. Press and hold the MEMO button. The unit announces, "Record your memo after
the tone."
2. Record your message after the beep.
3. Release MEMO when you're finished talking. The unit treats the memo as a
message, as the display shows.

Memory Full

When the unit's memory is full, it answers after 10 rings and announces, "Memory is
full." A 20-second waiting period follows, allowing you to enter your security code.