Setting The User Interface Configuration - Allied Telesis AT-GS950/24 Manual

How to Start an AT-GS950/24 WEB Management Session

Setting the User Interface Configuration

20
This procedure explains how to adjust the user interface and security
features on the switch. With this procedure you can enable an SNMP
Agent.
To set the switch's user interface configuration, do the following
procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select User Interface.
The User Interface Page is displayed. See Figure 10.
3. To enable or disable an SNMP agent, do the following:
a. Click the SNMP Agent parameter and choose Enable or Disable
from the list. The default is Enable. When you enable this
parameter, the SNMP agent is enabled.
b. Click Apply.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Figure 10. User Interface Page