Table of Contents
Advertisement
IMPRINT Operation
(Optional)
Alpine introduces IMPRINT - the world's first technology that
thoroughly eliminates in-car acoustic problems that normally degrade
sound quality, which enables us to experience music the way the artist
intended, refer to "About IMPRINT" (page 50).
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
The Parking Brake must be engaged to access the IMPRINT
mode screen. Otherwise, some functions are not adjustable.
Changing MultEQ mode
MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the vehicle. To accomplish this, MultEQ must take
measurements of the vehicles response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
1
Touch [SETUP].
The SETUP selection screen is displayed.
2
Touch [
] of AUDIO SETUP.
The display changes to the AUDIO setup screen.
3
Touch [ ] or [ ] of MultEQ.
Select the desired setting range.
Setting range : OFF (Manual Mode) / CURVE1 (MultEQ-1) /
CURVE2 (MultEQ-2)
• The Curve mode can be selected only when CURVE 1 and CURVE 2
are stored.
• When MultEQ is set to CURVE 1 or 2, MEDIA XPANDER, X-OVER,
T.Correction, Factory's EQ, Subwoofer System, Subwoofer Phase,
Subwoofer Channel, TW Setup, Parametric EQ and Graphic EQ are
set automatically. They are no longer user adjustable.
• When an external audio processor is connected, the MultEQ function
cannot be used.
• If MultEQ is set to OFF, the "Adjusting Bass/Treble" (page 26)
function is not available.
44
-EN
Adjusting Sound Setting in Manual Mode
You can change these sound settings to create your own preference
when the MultEQ mode is set to OFF (Manual Mode).
Use steps 1 to 5 to select one of the Sound menu
modes to modify. See the applicable section below
for details about the selected item.
1
Check the Defeat mode is off (page 27), and then
touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [
] of AUDIO SETUP.
The AUDIO setup screen appears.
3
Touch [
] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
4
Touch [ ] or [ ] or [
change setting.
Setting items : MEDIA XPANDER / X-OVER / T.CORR /
T.CORR PARAMETER / G-EQ / P-EQ / F-EQ /
TW SETUP
*
/ USER PRESET
* This function can be operable only when PXA-H100 (sold
separately) is connected and 2.2ch (3WAY) mode is set. For details,
refer to the Owner's Manual of PXA-H100.
5
Touch [RETURN] to return to the previous screen.
• If IMPRINT audio processor is connected, "Switching the Subwoofer
phase," "Setting the Subwoofer System," or "Setting the Subwoofer
Channel" operations are available. For details, refer to page 27.
Setting the MX Level
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, DVD and iPod, will
be able to reproduce the music clearly even in cars with a lot of road
noise.
Setting item : MEDIA XPANDER
1
Select ON or OFF of MX by touching [ ] or [ ] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON:
Turns on the specified MX mode.
] of the desired item to
Advertisement
Table of Contents
