Table of Contents
Advertisement
Connections
*
NORM
EQ/DIV
• Set the system switch to "NORM" when only a changer is connected (when the Ai-NET compatible equalizer is not used).
When the IMPRINT audio processor is connected, set to EQ/DIV position.
* The system switches are located on the right of the unit (if the front panel is viewed from the front).
REMOTE OUT (White/Brown)
REMOTE IN (White/Brown)
REVERSE (Orange/White)
(Yellow)
(White)
(Red)
(Yellow)
(White)
(Red)
(Pink/Black)
AUDIO INTERRUPT IN
(Blue/White)
REMOTE TURN-ON
PARKING BRAKE
(Yellow/Blue)
ACC
(Red)
(Black)
GND
(Blue)
POWER ANT
(Yellow)
BATTERY
Amplifier
Amplifier
Amplifier
(Yellow)
(Green)
(Green/Black)
(White)
(White/Black)
(Grey/Black)
(Grey)
(Violet/Black)
(Violet)
Antenna
ISO Antenna Plug
To steering remote
control interface box
To back-up camera or
To remote input lead
To remote output lead
To plus side of the
back lamp signal lead
of the car
To video input
terminal
To Audio input
terminals (R, L)
To Video output
terminal
To Audio output
terminals (R, L)
Rear Left
Rear Right
Front Left
Front Right
Subwoofers
CD Changer
(Sold Separately)
To
To iPod
To vehicle phone
To amplifier or equalizer
To the parking brake signal lead
To power antenna
Ignition key
Battery
Speakers
Rear left
Front left
Front right
Rear right
75
-EN
Advertisement
Table of Contents
