NEC SuperScript 610 User Manual page 22

3–4 SuperScript Software Installation
Table 3.2 Pre-Installation Steps
STEP ACTION
1 Install Network
(Server, Client)
2 Install Windows 95
3 Remove the current
SuperScript software • Click the Start button and click Run.
if it is installed in
the PC.
4 Ensure that the peer
to peer network is
up by opening the
Network Neighbor-
hood window and
finding neighbors.
(Server, Client)
5 Defragment
the disk
Note: Be sure to remove the current SuperScript software prior to
installing the SuperScript for Windows 95 in order to avoid installation
problem.
Note: Appendix A "Troubleshooting" provides some instructions on what
to do for installation problems.
COMMENT
SuperScript software will operate with any network
card and network software supported by Windows.
Install Windows.
SuperScript can be used as a personal printer or as a
shared printer while running under Windows.
Follow these steps.
• Type "C:\SSCRIPT\NECDELETE.EXE" in the
command line box and press enter.
• Or, if your current SuperScript software is
SuperScript Network and PS option kit software, type
"C:\NECSSFW\WSREMOVE.EXE" in the command
line box and press enter.
This step is recommended to ensure that your network
is operational and all connected network peers can
communicate with one another.
You can use Disk Defragmenter in Windows (Refer to
Windows 95 document.).
This is recommended but not generally necessary.