Fonts In Pcl Mode - NEC SuperScript 610 User Manual

8–6 Using Fonts
FONTS IN PCL
MODE
If you only need TrueType fonts (identified with a
TT symbol on your font list), you can hide all others
from your list of available fonts, by following these
steps:
1. Click the Start button, point to Settings, and
then click Control Panel. Control Panel
window appears.
2. Double-click the Fonts icon in the Control
Panel window. Fonts window appears.
3. Select the View menu and click Options.
Options dialog box appears.
4. Click the TrueType tab.
5. Select Show only TrueType fonts in the
programs on my computer, and click OK to
exit the Options dialog box.
NEC SuperScript PCL mode supports all resident
fonts, corresponding to the internal fonts in the HP
LaserJet 4P.
You can select these resident fonts in SuperScript
PCL mode. If you did not install the SuperScript
TrueType fonts included with your software, you
will not be able to select these resident fonts. Install
these fonts now by reinstalling your SuperScript
software or by using the font utility in Windows.
(See next section).