Sharing The Printer - NEC SuperScript 610 User Manual

SHARING THE
PRINTER
Sharing and Connecting
Windows allows peers to use resources connected
and assigned to other PCs through the Share facility.
To share a resource in a workgroup, the resource
owner must set the resource as shared. To share the
SuperScript printer among other SuperScript peers in
the workgroup, the Server performs the following
steps:
1. Click the Start button, point to Programs,
NEC SuperScript Tools, and then click
NEC SuperScript Console.
2. Select Share Local Printer in the Network
menu.
3. Check item(s) you are going to share (i.e.
GDI, PCL and PostScript).
4. Select OK. Printer sharing will be established
automatically every time Windows starts up.
Note: Only one SuperScript printer can be connected
to any PC. Therefore, the Share command
automatically selects the SuperScript printer
connected to the Server's PC. If an additional non-
SuperScript printer is also connected to the Server's
PC then click Sharing in the Network menu of the
Printers window to share that printer.
To stop sharing the SuperScript printer resource,
perform the following steps:
1. Click the Start button, point to Programs,
NEC SuperScript Tools, and then click
NEC SuperScript Console.
2. Click the Control Panel tab or select the
Network menu.
3. Select the Share Local Printer menu item.
5–3