Table of Contents
Advertisement
3–6 SuperScript Software Installation
Table 3.3 SuperScript Software Installation Steps
STEP
ACTION
1
Diskette or CD Installation (Server, Client, Personal)
2
Via Diskette #1 then Across the Network (Client)
Table 3.4 Diskette or CD Installation Steps (for Server, Client,
and Personal Software Installation)
STEP
ACTION
1
Connect your SuperScript printer to PC and
turn on the printer. (Server/Personal)
2
Turn on the PC.
3
Windows may display New Hardware Found
dialog box. If you find this message, select
"Driver from disk provided by hardware
manufacturer", and click OK. Then go to
step 4A.
4
Insert the software diskette #1 or CD in
the drive.
5
Click the Start button, and then click Run.
6
(In case of diskette)
drive:\netsetup.exe
(In case of CD)
drive:\software\win95\ss6x0\netsetup.exe
4A
Install From Disk dialog box appears.
Insert the software diskette #1 or CD in
the drive.
5A
(In case of diskette)
drive:\
(In case of CD)
drive:\software\win95\ss6x0
Note: Once you start the installation, you can cancel at any time by
selecting the Quit button.
COMMENT
See Table 3.4
See Table 3.5
COMMENT
You must turn off your PC
before the printer is turned on.
Windows 95 will start.
If you do not find this
message, go to step 4.
The Run Program dialog box
appers.
Type the command and press
enter.
SuperScript setup program
will start.
Type the text and press enter.
SuperScript setup program
will start.
Advertisement
Table of Contents
