Table of Contents
Advertisement
FONTS IN GDI
MODE
One benefit of SuperScript GDI's WYSIWYG (What
You See Is What You Get) approach becomes clear
as you use fonts. In Windows, any font you can see
on the screen will print on your printer. This includes
TrueType, Type 1 (through Intellifont for Windows).
TrueType is most common, since it is already built
into Windows. However, in most cases the
performance difference between TrueType and other
fonts is negligible.
One advantage of GDI mode becomes evident when
you work with documents that have multiple fonts.
A standard printer language such as PostScript must
fetch additional information every time it processes a
new font. A document with many different fonts can
take a noticeably long time to print. In GDI mode,
the work of fetching font information takes place at
the time the document is retrieved and displayed to
the screen. Printing the document requires only a
small amount of additional processing, which means
quick text printing no matter how many fonts are
included.
Note: Windows includes some special built-in fonts
that were not meant for printing, including MS Serif
and MS Sans. These special fonts were designed for
screen display, and so their resolution (number of
dots per inch) is coarser than the fonts that normally
appear on a printed page. It is recommended that
you do not select these fonts when creating your
documents.
Using Fonts
8–5
Advertisement
Table of Contents
