Intermec SR30 User Manual page 33

8 Double-click Co-processor upgrade (HIP). The firmware
9 Scan the firmware upgrade bar code on screen, or print the
10 From the Tools menu, select Upgrade product firmware.
11 Select the component you want to upgrade and click Next.
12 Click Browse to browse to the location of the HIP firmware
SR30 Handheld Scanner User's Guide
Chapter 3 — Troubleshooting and Maintaining the SR30
upgrade bar code is added to the setup sheet.
Note: After you scan the firmware upgrade bar code, you
have 1 minute to start the upgrade process.
bar code set up sheet and scan the bar code.
The next screen appears.
The Firmware selection window appears.
upgrade file, select the file, and click Open.
23