Maintaining the SR30
To keep your SR30 in good working order, you may need to
upgrade the SR30 and clean the scanner window.
Upgrading the SR30
Use the procedures below to upgrade the:
•
•
The SR30 contains a Host Interface Processor (HIP). You can
upgrade the HIP firmware.
To upgrade the SR30, you need:
•
•
•
•
To upgrade the SR30 HIP or imager firmware
1 Download the latest SR30 HIP upgrade package from the
2 Connect your SR30 to a host PC with an RS-232 cable.
SR30 Handheld Scanner User's Guide
Chapter 3 — Troubleshooting and Maintaining the SR30
Host Interface Processor (HIP)
Imager engine firmware
an RS-232 accessory cable. For more information, see
Accessories" on page
a PC running Microsoft® Windows® XP with SP2 or
Microsoft Windows 2000.
EasySet version 5.6.0.0 or later.
the SR30 HIP upgrade package.
Intermec web site at www.intermec.com.
a
Go to Support > Downloads.
b If necessary, click the link to search the product
downloads.
c
From the Select A Product drop-down list, choose Bar
Code Scanners: SR30 Handheld Scanner.
d Click the link to download the HIP firmware upgrade
package and save it to your PC.
e Unzip the .zip file.
34.
"Cable
21