Intermec SR30 User Manual page 19

4 If you are using the external power RS-232 cable, connect the
5 Turn on your host device.
6 If necessary, configure your SR30 serial parameters to match
To create a keyboard wedge connection
1 Make sure that you have the keyboard wedge cable
2 Turn off your host device.
3 Connect the cable to your SR30 and host device.
SR30 Handheld Scanner User's Guide
Chapter 2 — Connecting and Configuring the SR30
power supply to the RS-232 cable and an AC power outlet.
the host device.
The default serial parameters for the SR30 are:
Baud Rate: 19200
Data Bits: 8
Parity: none
Stop Bits: 1
For help, see "Serial Parameter Bar Codes" on page 14
EasySet version 5.6.0.0 or later. EasySet is available on the
Intermec web site at www.intermec.com/EasySet.
(P/N 236-162-xxx) and appropriate power supply (if
necessary).
AC power supply
To host device
or
9