Intermec SR30 User Manual page 15

2 Pull the trigger and direct the red beam so that it falls across
3 Release the trigger.
SR30 Handheld Scanner User's Guide
all bars in the bar code label.
Use this test bar code:
Code 39 Test Bar Code
*123456*
*123456*
Tip: Depending on your screen resolution, you may be able
to scan bar codes displayed on your computer screen.
When the SR30 successfully reads a bar code label, the SR30
creates a single beep and the status light briefly turns green.
Chapter 1 — Learning About the SR30
5