Intermec SR30 User Manual page 20

Chapter 2 — Connecting and Configuring the SR30
4 Connect the power supply to the keyboard wedge cable and
5 Turn on your host device.
6 If necessary, configure your SR30 for an International
To create a keyboard wedge (Y cable) connection
1 Make sure that you have the keyboard wedge cable
2 Turn off your host device.
3 Connect the cable to your SR30 and host device(s).
4 Turn off your host device.
5 Connect the cable to your SR30 and host device(s).
10
an AC power outlet.
keyboard. The default keyboard is North America. For help,
see "International Keyboard Bar Codes" on page
(P/N 236-204-xxx) and appropriate power supply (if
necessary).
To host device
AC power supply
To host devices
SR30 Handheld Scanner User's Guide
AC power supply
12.