Download
Share
Print this page
  1. Manuals
  2. Brands
  3. MF DIGITAL Manuals
  4. Printer
  5. Signature Pro
  6. Installation manual

MF DIGITAL Signature Pro Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
SCRIBE EC WITH PRIMERA PRO PRINTER INSTALLATION
Minimum PC System Requirements
•
A Pentium II/III PC 800 MHz or faster
•
Windows 2000 Pro (Service Pack 4.0) or Windows XP
•
512 MB Ram
•
7200 RPM ATA-100 Clean Hard Disk NTFS - (5GB Free Space)
•
800 x 600 display, 16-bit color recommended
•
Two Button Mouse
•
Two Free PCI Slots
•
1 external COM port (COM1 or COM2) - 2 ports needed if using Prism
Plus or Spectrum2
•
Win ASPI driver layer (Included)
•
IEEE-1394s adapters (Included) (Except print Station)
•
Appropriate IEEE-1284 Printer Cable if attached
Scribe EC and Signature Pro
Installation Guide
GUIDE
MF DIGITAL
121 Carolyn Blvd.
Farmingdale, NY 11735
001 631 249 9393
www.mfdigital.com
Installing the Fire Wire Adapter Card
Document Revision2/21

Advertisement

loading
Need help?

Need help?

Do you have a question about the Signature Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MF DIGITAL Signature Pro

Summary of Contents for MF DIGITAL Signature Pro

  • Page 1 Scribe EC and Signature Pro Document Revision2/21 Installation Guide SCRIBE EC WITH PRIMERA PRO PRINTER INSTALLATION GUIDE Minimum PC System Requirements • A Pentium II/III PC 800 MHz or faster • Windows 2000 Pro (Service Pack 4.0) or Windows XP •...
  • Page 2 IF YOU PURCHASED A PRINT STATION – SKIP THIS PAGE Note: The internal configuration of your computer may be different from the computer pictured below. One and two drive ScribeECs require one IEEE-1394 card. Four drive systems require two IEEE-1394 cards. 1.

  • Page 3: What's In The Box

    Spare ink cartridge holder • Warranty statement and registration card • Operator’s manual Installing the Signature PRO Printer Adapter Plate 1. Using needle nose pliers, remove the rubber feet from the bottom of the printer (fig. 1). (fig. 1) 2. Screw the printer plate to the bottom of the inkjet printer as seen in (fig.

  • Page 4: Making The Connection

    Making the Connection 1 & 2 Drive Systems 4 Drive System PC Connection Two drive unit uses one fire wire adapter card and one cable. Four drive unit uses two firewire adapter cards and two cables… Install one cable in each firewire card.
  • Page 5 Installing the SCRIBE EC Software 1. Insert the SCRIBE EC software CD. From the CD ROM drive of the computer, click Install SCRIBE Software. (fig. 1) Click Next (fig. 1). 4. Accept the license agreement and click Next (fig. 2). (fig.
  • Page 6 Installing the SCRIBE EC Alignment Utility 1. Insert the SCRIBE CD into the CD- ROM drive of your PC. 2. Click on setup.exe of the alignment utility and Click OK (fig. 1). (fig. 1) 3. Click the button indicated in (fig. 2). (fig.
  • Page 7 Installing the Signature PRO Printer Driver 1. Click Start-> Settings-> Printers 2. Click Add New Printer 3. The “Welcome to the Add Printer Wizard” window will appear (fig 1). Click Next. 4. In the “Local or Network Printer” window, uncheck the “Automatically detect installed printer”...
  • Page 8 Installing the Signature PRO Printer Driver (cont.) 7. After specifying the driver for the Signature PRO printer, the printer “CD Color Printer PRO” will appear in the “Add Printer Window” (fig 7). Click Next to continue. 8. In the “Name your Printer” window,...
  • Page 9 NEW PRN file.*** Printer Spooling It is important to disable printer spooling on the Signature PRO printer. To do so, please follow the steps below: 1. Go to Start-> Settings -> Printers 2. Right-click on the CD Color Printer PRO printer in the Printers Folder 3.
  • Page 10 Aligning the Drive Tower 1. From your Start Menu Open the SCRIBE EC (fig. 1) Alignment Utility (fig. 1). It will be located in the folder designated when you installed the alignment utility. Choose the appropriate COM Port which the Scribe EC Loader is installed on.
  • Page 11 Once the Scribe EC Software opens, click on the Settings tab. (fig. 2) Click Change Settings and select the MF Digital Signature Pro Printer After making this selection, you will need to restart the Scribe EC Software program. 4. After restarting the Scribe EC Software program, go to the Settings Tab.