WEATHER ALERT (TH-K20A K TYPE ONLY)
Weather Alert is available only in the USA and Canada. When activated,
this function will check for a received NOAA 1050 Hz tone. When the tone is
received, the weather alert tone will sound.
1 Enter Menu mode and access Menu No. 35 (WX.ALT), then press [F].
2 Rotate the ENC control to select "ON", then press [F] to store the setting.
3 Press [MENU] or [PTT] to exit Menu mode.
•
When activated, the "
•
When a signal is being received, the "
Whether or not Weather Alert is activated, you can still access the weather
channels.
•
While recalling the Call channel, you cannot change to the Weather channel.
1 Press the key programmed with the [WX] function.
2 Rotate the ENC control to select your desired channel.
MR.
CH
Name.
No.
WX 1
A1
162.550
WX 2
A2
162.400
WX 3
A3
162.475
WX 4
A4
162.425
WX 5
A5
162.450
The memory channel only for the weather alert is scanned.
Press and hold the key programmed with the [WX] function to start the weather
channel scan.
•
Scanning stops when the channel with the highest signal level is received.
•
Memory scanning stops when performing any operation other than [LAMP], [MONI],
[Key Lock] ([F] (1s)), and ENC control.
54
WEATHER ALERT ON/ OFF
" icon appears on the display.
WEATHER CHANNEL
Freq.
Location
(MHz)
NOAA/
Canada
NOAA/
Canada
NOAA/
Canada
NOAA
NOAA
WEATHER CHANNEL SCAN
" icon blinks.
MR.
CH
Freq.
Name
No.
(MHz)
WX 6
A6
162.500
WX 7
A7
162.525
WX 8
A8
161.650
WX 9
A9
161.775
WX 10
A0
163.275
Location
NOAA
NOAA
Canada
Canada
–