5-Tone Signaling (For E Type Only) - Kenwood NX-5300E2 User Manual

5-TONE SIGNALING (For E Type Only)

5-tone Signaling is enabled or disabled by your dealer. This function opens the
squelch only when the transceiver receives the 5 tones programmed in your
transceiver. Transceivers that do not transmit the correct tones will not be heard.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
Transmitting
o
1
Select your desired zone and channel.
2
Press the key programmed as [Individual]/ [Individual + Status]/ [Individual
+ Short Message]/ [Group]/ [Group + Status] or [Group + Short Message]
to enter Selcall Mode.
Alternatively, press the key programmed as [Menu] to enter Selcall Mode using Individual/
Individual + Status/ Individual + Short Message/ Group/ Group + Status or Group + Short
Message in the Menu Mode.
3
Press the [J] and [K] keys to select the station you want to call.
On full key model transceivers, you can enter the station ID using the keypad.
●
4
Press the key programmed as [Call 1] to [Call 6] and begin your conversation.
Note:
You can also use the keys programmed as [Digit 1x Down], [Digit 1x Up], [Digit 10x
●
Down], and [Digit 10x Up] to adjust the Selcall number. [Digit 1x Up] and [Digit 1x
Down] increases and decreases the Selcall number by 1 respectively each time the key
is pressed. [Digit 10x Up] and [Digit 10x Down] increases and decreases the Selcall
number by 10 respectively each time the key is pressed.
Receiving
o
When a call containing the correct tones is received, the transceiver will enter Selcall
mode. An alert tone will sound and the calling station's ID appears on the display.
Press any key to return to normal operation.
STATUS MESSAGE
You can send and receive Status messages which may be decided in your talk group.
Messages can contain up to 16 alphanumeric characters.
A maximum of 250 received messages can be stored in the stack memory of your
transceiver.
Transmitting
o
1
Select your desired zone and channel.
2
Press the key programmed as [Status] to enter Status mode (proceed to step
5), or [Individual + Status]/ [Group + Status] to enter Selcall mode (proceed
to step 3).
3
Press the [J] and [K] keys to select the station you want to call.
On full key model transceivers, you can enter the station ID using the keypad.
●
57