Weather Alert (Th-D72A Only); Weather Alert On/ Off; Weather Channel; Weather Alert Scan - Kenwood TH-D72A Instruction Manual

The Weather Alert is available only in the USA and Canada. When activated, this function will check for a received NOAA
1050 Hz tone. When the tone is received, the weather alert tone will sound.

WEATHER ALERT ON/ OFF

1 Enter Menu mode and access Menu 13A.
2 Set the Weather Alert to "On" or "Off".
• When activated, the " " icon appears on the display.
• When a signal is being received, the " " icon blinks.

Weather Channel

Whether or not the Weather Alert is activated, you can
still access the weather channels. The Weather Alert
simply notifies you of activity on the weather channels.
1 Press the key programmed with the [WX] function.
2 Press [ ]/[ ] or rotate the Tuning control to select
your desired channel.
Channel Frequency
No. (MHz)
A1 162.550
A2 162.400
A3 162.475
A4 162.425
A5 162.450
A6 162.500
A7 162.525
A8 161.650
A9 161.775
A10 163.275

WEATHER ALERT (TH-D72A ONLY)

Memory
Location
Name
NOAA/
WX 1
Canada
NOAA/
WX 2
Canada
NOAA/
WX 3
Canada
WX 4 NOAA
WX 5 NOAA
WX 6 NOAA
WX 7 NOAA
WX 8 Canada
WX 9 Canada
WX 10 –

WEATHER ALERT SCAN

The memory channel only for the weather alert is
scanned.
1 Enter Menu mode and access Menu 13B.
2 Set the Weather Alert Scan to "Off" or "15/ 30/ 60
(min)".
When the weather channel scanning time is set:
Auto scanning starts after the set time.
When the weather channel scanning is set to Off:
Press and hold the key programmed with the [WX]
function to start the weather channel scan.
• Scanning stops when the channel with the highest signal
level is received.
• Memory scanning stops when performing any operation other
than [LAMP], [MONI], [key lock] ([F](1s)),
Tuning control.
WX – 1
[ ]/[ ]
, and