Dcs - Kenwood TH-K40A Instruction Manual

CTCSS FREQUENCY SCAN
This function scans through all CTCSS frequencies to identify the incoming
CTCSS frequency on a received signal. You can use this function to find which
CTCSS frequency is used by your group.
1 Press [TONE] 2 times to turn the CTCSS function ON.
• Each time you press [TONE], the selection changes as follows:
➡
Tone ( )
• The " " icon appears when the CTCSS function is ON.
2 Press [T.SEL] (1s) to run the CTCSS Frequency scan.
• Scan starts and "CT.SCAN" appears on the display.
• When the CTCSS frequency is identified, a beep sounds and the identified
frequency blinks.
3 Press [T.SEL] to program the identified frequency in place of the current tone
frequency.
• If you do not want to program the identified frequency, press any key other than
[MONI], [LAMP], or [T.SEL].
Digital Coded Squelch (DCS) is another application which allows you to ignore
(not hear) unwanted calls. It functions the same way as CTCSS. The only
differences are the encode/ decode method and the number of selectable codes.
For DCS, you can select from 104 different codes.
Available DCS Codes
023 025 026 031 032 036 043 047 051 053 054 065 071 072 073
074 114 115 116 122 125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244 245 246 251 252 255
261 263 265 266 271 274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432 445 446 452 454 455
462 464 465 466 503 506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731 732 734 743 754
Note: DCS does not cause your conversation to be private. It only relieves you from
listening to unwanted conversations.
➡
CTCSS ( )

DCS (

➡
) Cross Tone ( )
DCS
DCS Code
➡
Off (no display).
37