Directory - VTech FS6220-2 User Manual

Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory,
caller ID log or redial list while you are on a call. Chain dialing can be useful if you
wish to access other numbers (such as bank account numbers or access codes)
from the directory, caller ID log or redial list.
To access a number in the directory, caller ID log or redial list while on a call:
To enter the directory, press MENU twice.
.
-OR-
To enter the caller ID log, press MENU then scroll to Caller ID log then
press SELECT.
-OR-
To enter the redial list, press REDIAL.
2. Scroll to the desired entry.
3. Press SELECT to dial the displayed number.
Find handset
Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the telephone base. All idle handsets ring and
•
display ** Paging **.
To end paging:
Press /FIND HANDSET on the telephone base.
•
-OR-
, OFF, MUTE or any dialing key on a handset.
• Press
Do not press and hold /FIND HANDSET for more than four seconds. It may lead to
handset deregistration. If To register HS and See manual displays alternately on the
handset, refer to Troubleshooting to register the handset to the telephone base.

Directory

Each handset can store up to 30 directory entries.
To add a directory entry:
. Enter the number (up to 30 digits) when the handset is not in use then press
SELECT. Then go to Step 3.
-OR-
When the handset is not in use, press MENU then scroll to Directory, and then
press MENU twice.
2. Use the dialing keys to enter the number (up to 30 digits).
-OR-
Copy a number from the redial list by pressing REDIAL and then press
REDIAL repeatedly to select a number. Press SELECT to copy the number.
Press SELECT to move on to enter the name.
3.
4. Use the dialing keys to enter the name (up to 5 characters). Additional key
presses show other characters of that particular key.
Press SELECT to store the entry.
5.
While entering names and numbers, you can:
Press DELETE to backspace and erase a digit or character.
•
Press and hold DELETE to erase the entire entry.
•
• Press or
Press and hold PAUSE to insert a dialing pause (for entering numbers only).
•
• Press 0 to add a space (for entering names only).
To review and dial a number from the directory:
Entries are sorted alphabetically.
. Press when the handset is not in use.
2. Scroll to browse through the directory, or use the dialing keys to start a
name search.
3. When the desired entry appears, press
To edit a directory entry:
When the desired entry displays, press SELECT.
.
2. Use the dialing keys to edit the number, then press SELECT.
Use the dialing keys to edit the name, then press SELECT to confirm.
3.
To delete a directory entry:
When the desired entry displays, press DELETE.
.
2. When the screen displays Delete contact?, press SELECT.
to move the cursor to the left or right.
to dial.
7
, or